Cherry G80-9013

From Deskthority Wiki
(Redirected from G80-9013)
Jump to navigationJump to search

This article is a stub. You can help Deskthority by expanding it.

This article requires photographic illustration
Cherry G80-9013
Model no. G80-9013
Branding Codis
Manufacturer Cherry
Layouts German only
Keyswitches Cherry MX Black
Switch mount PCB mount
Precedes Phoneboard+

The Cherry G80-9013 ("phoneboard") is a keyboard with an integrated telephone. It features full n-key rollover and was manufactured by Cherry for CODIS Computer GmbH in Ottobrunn, Germany.

Introduction[edit | edit source]

The keyboard contains the whole telephone unit except for the handset or headset, for each of which a dedicated plug is situated on the left side of the keyboard case. Volume regulation is done using a small wheel situated at the rear of the keyboard housing (one for the headset, one for the built-in speaker).

The handset has a storage tray with no other function than storage (which means putting the handset back to the tray does not interrupt the communication, this has to be done by pressing a key of the keyboard).

The speaker is situated above the telephone keys and the built-in microphone on the case front (beneath the Ctrl key).

Known variants[edit | edit source]

  • G80-9013 HAD (German layout, black switches)

How to disassemble[edit | edit source]

For the G80-9013 HAD, just loosen the 4 screws on the back side. Similar to IBM Model M (101 key), you need a narrow screw driver! Unless the original, a cross-point is sufficient.

Unlike later models, you need the screw driver not for clips!

Gallery[edit | edit source]

See also[edit | edit source]