Cherry G80-9013
This article is a stub. You can help Deskthority by expanding it.
![]() |
This article requires photographic illustration |
![]() | |
Model no. | G80-9013 |
---|---|
Branding | Codis |
Manufacturer | Cherry |
Layouts | German only |
Keyswitches | Cherry MX Black |
Switch mount | PCB mount |
Precedes | Phoneboard+ |
The Cherry G80-9013 ("phoneboard") is a keyboard with an integrated telephone. It features full n-key rollover and was manufactured by Cherry for CODIS Computer GmbH in Ottobrunn, Germany.
Introduction[edit | edit source]
The keyboard contains the whole telephone unit except for the handset or headset, for each of which a dedicated plug is situated on the left side of the keyboard case. Volume regulation is done using a small wheel situated at the rear of the keyboard housing (one for the headset, one for the built-in speaker).

The handset has a storage tray with no other function than storage (which means putting the handset back to the tray does not interrupt the communication, this has to be done by pressing a key of the keyboard).

The speaker is situated above the telephone keys and the built-in microphone on the case front (beneath the Ctrl key).
Known variants[edit | edit source]
- G80-9013 HAD (German layout, black switches)
How to disassemble[edit | edit source]
For the G80-9013 HAD, just loosen the 4 screws on the back side. Similar to IBM Model M (101 key), you need a narrow screw driver! Unless the original, a cross-point is sufficient.
Unlike later models, you need the screw driver not for clips!

Gallery[edit | edit source]
- G80-9013HAD
-
The G80-9013 HAD comes in a case similar to the G80-1000 but with some cut-outs for the telephone unit and a speaker grille.
-
Factory sticker at the rear
-
Detail Caps Lock key with LED window
-
Detail numpad and phone section
-
Overview of the PCB; note the microphone near the lower left corner.
-
PCB moved aside
-
Overview with PCB aside
-
Speaker zone
-
Another view of the speaker zone
-
Telephone PCB
-
Left side of the telephone PCB in detail.