Editing Hi-Tek Series 725 keyboards (section)

===Third generation===
{{Main|Hi-Tek Series 725 third generation}}

The third generation uses injection moulded upper and lower case halves. Unlike the second generation, the third generation lower case half features only one cable port. The lower half also features a [[cable channel]] that allows the cable to be routed to the left or right side of the keyboard and provides strain relief. The feet from the second generation carry over to the third. The two case halves are held together with locking tabs and screws. Four tabs in the lower half snap and lock into recesses in the upper half. Two screws are then added to secure the attachment.

The style of the third generation case is modelled after the [[IBM Enhanced Keyboard]]. It shares a similar wedge profile and overall size, but lacks the curved recess at the edge of the key aperture. The key layout is based on the 101 key layout of the Model M, but retains the enter key from that Model F AT keyboard as well as the 1-unit backspace. The stepped keys at the edges of the alpha group were inherited from the AT style of second generation keyboards.

<gallery widths=250 heights=187>
File:Gen3-Front.JPG | Front
File:Gen3-Rear.JPG  | Rear
File:Gen3-Side.JPG  | Side
</gallery>