Editing Converting NerD60 to TMK (section)

==Introduction==
* '''NerD60''' is a PCB designed and produced by [[GON's KeyboardWorks]].
* The default firmware is closed source and has some stability issues (the keyboard is not recognized in BIOS or in GRUB, lag on OSX)
* I wanted '''TMK firmware''' on this keyboard because this software has a lot of features. 
* In TMK the code for '''NerD60''' and '''80(TKL)''' was created by '''Deskthority''' user '''xauser''', you can find the code [https://github.com/tmk/tmk_keyboard/tree/master/keyboard/nerd here](this code is not longer maintained so you are better off using the [https://github.com/xauser/tmk_keyboard/tree/xauser/keyboard/nerd Repo] maintained by '''xauser''' )
* Now a '''BIG WARNING''': what I'm going to explain here has the potential to brick your expensive and quite rare Korean keyboard, do it on your own risk and don't blame this article or yours truly for any mishaps. 
* Also as a warning, once you have converted the board you won't be able to go back to the original firmware unless you get the original bootloader from GON (you can't make a backup because he protected the thing ), also you are loosing official support from GON .
* In this article we assume that the ISP programmer used is an '''USBasp''' , in case you will be using something else the commands will have to be changed in order to reflect the correct ISP programmer used.
* For this mod there is also a discussion thread [https://deskthority.net/workshop-f7/nerd60-tmk-conversion-help-needed-t11971.html here], feel free to join and contribute or ask questions.
* And last but not least, please feel free to contribute to this article