Editing Datacomp DFK119G (section)

==Features==
The DFK119G utilizes two sets of 12 F keys. One set on the top row and another set in the older [[IBM 5322 System/23 Datamaster computer|IBM Datamaster]] position on the left-hand side. One set generates F1 through F12 commands. The other generates SHIFT+F1-F12 depending on the key pressed. The SHIFT+ setting may be swapped from the left-hand F keys to the top F keys via a selector switch on the side of the keyboard. The keyboard also features an XT/AT selector switch. 

There are three rows of F key descriptor strips available via the flip up assembly above the F keys. One strip is viewable from the top of the flip up assembly. The other two are only visible with the assembly open. 

The speed button located in the center of the 8 directional arrow keys includes an integrated lock light which may be turned on and off by pressing SHIFT+SPEED. This key is used to increase or decrease the repeat rate of the keyboard when a key is held down. The speed key may also be used to swap positions of the Caps Lock and CTRL keys, but no alternative keycaps are supplied with the keyboard. The included instruction pamphlet mentions its use in enabling or disabling a beeper sound. Upon disassembly, no beeper is present.

A three-position cable gutter allows for routing the cable to the center, left, or right.