Kwanda PB11C05
This article is a stub. You can help Deskthority by expanding it.
 |
This article requires photographic illustration |
| Manufacturer | Kwanda |
|---|---|
| Product code | PB11C05 |
| Sense method | Metal contact |
| Rated lifetime | 1 M |
| Website | www.kwanda.net/en/productlist.asp?categoryid=370 |
Kwanda PB11C05 is a four-tab clone switch. The specification cites "1.5±0.5 TRAVEL (RINGING)"; this implies that the switch clicks at 1.5 mm, as that would be far too low travel for an Alps clone switch.
Unusually for an Alps clone, PB11C05 switches are branded with Kwanda's logo,<ref name="rdt-GH" /><ref name="GH-unknown" /> something which Kwanda have themselves confirmed.
The Kwanda website illustrates the switch with a drawing which shows a switch with slits, whereas actual production switches do not have slits; the exterior design is very similar to the YH-B Alps clone.
The MOQ is 5000 pieces.
Other equipment[edit | edit source]
- Guitar Hero II X-plorer guitar controller<ref name="rdt-GH" />
References[edit | edit source]
<references> <ref name="rdt-GH">Reddit — I decided to open up my old Guitar Hero controller to try and fix it, and found a neat surprise inside! Dated 2014. Retrieved 2015-07-28.</ref> <ref name="GH-unknown">Deskthority — Alps Appreciation (page 35)</ref> </references>
