Editing Hollow square mount recognition

{{Switch recognition banner}}

[[File:PED keyswitch -- keycaps.jpg|thumb|200px|Typical hollow square mount keycaps]]

This page covers switches where the slider is negative (hollow, receiving a post in the keycap inside a slot) and square in cross-section. The switches on this page are not all mutually keycap-compatible.

==Hi-Tek and Stackpole==
<gallery widths=200 heights=150>
File:No photograph.svg                            | [[Hi-Tek High Profile]], waffle frame
File:Hi-Tek linear, flat top -- recognition.jpg   | [[Hi-Tek High Profile]], flat-top
File:No photograph.svg                            | [[Hi-Tek lock]], waffle frame, type 1
File:No photograph.svg                            | [[Hi-Tek lock]], waffle frame, type 2
File:Hi-Tek lock, flat top -- recognition.jpg     | [[Hi-Tek lock]], flat-top
File:Hi-Tek modular -- recognition.jpg            | [[Hi-Tek Dovetail Series]]
File:No photograph.svg                            | [[Stackpole switch grid]], type 1
File:No photograph.svg                            | [[Stackpole switch grid]], type 2
</gallery>

==Mitsumi==
<gallery widths=200 heights=150>
File:Mitsumi hybrid -- tactile -- recognition.jpg                   | [[Mitsumi KPQ Type]]
File:Mitsumi miniature mechanical, Mitsumi mount -- recognition.jpg | [[Mitsumi miniature mechanical]], tactile
File:Mitsumi miniature mechanical TGL -- variants table.jpg         | [[Mitsumi miniature mechanical]], linear
File:Mitsumi std 2MM tactile -- recognition.jpg                     | [[Mitsumi standard mechanical]], Type 2 Mitsumi mount, tactile
File:Mitsumi std 2MM latching -- recognition.jpg                    | [[Mitsumi standard mechanical]], Type 2 Mitsumi mount, latching
</gallery>

==Other==
<gallery widths=200 heights=150>
File:Micro Switch hall effect -- recognition.jpg  | [[Micro Switch SD Series]], variant
File:Philips keyswitch -- recognition.jpg         | [[PED keyswitch]]
</gallery>
[[Category:Recognition guides]]