Editing Table of PCBs

{| class="wikitable"
! PCB
! Size
! Switch
! Chip
! ISO?
! Bootloader
! Design files
! Connector
! LEDs
! Stabs
! Comments
|-
| [https://geekhack.org/index.php?topic=41464.0 GH60]
| 60%
| Cherry MX
| atmega32U4 (AVR)
| supported
| DFU<ref name="ATMELDFU">ATMEL DFU: Flash with [https://dfu-programmer.github.io/ dfu-programmer] or [http://www.atmel.com/tools/FLIP.aspx FLIP].</ref>
| N/A
| mini
| Caps
| PCB<ref name="PCBstabs">PCB mount stabilizers supported. Note that plate mount stabilizers' support depends ''only'' on the ''plate'' used.</ref>
| Backlight: individual LEDs with extra module (N/A)
|-
| [https://geekhack.org/index.php?topic=69740.0 hasu's Alps64]
| 60%
| Alps
| atmega32U2 (AVR)
| supported
| DFU<ref name="ATMELDFU" />
| [https://github.com/tmk/alps64 kicad]
| mini
| none
| plate<ref name="platestabs">Only plate mount stabilizers supported; i.e. this PCB ''can not'' be used without a plate.</ref>
|
|-
| [https://www.massdrop.com/buy/infinity-keyboard-kit Infinity]
| 60%
| Cherry MX or Alps
| MK20DX128VLF5 (ARM)
| not supported
| [https://github.com/kiibohd/controller/wiki/Bootloader kiibohd]<ref name="kiibohdDFU">Kiibohd DFU: Flash with [http://dfu-util.sourceforge.net/ dfu-util].</ref>
| [https://github.com/kiibohd/pcb kicad]
| mini
| none
| plate<ref name="platestabs" />
|
|-
| [https://deskthority.net/workshop-f7/iso50-a-hand-wired-iso-inspired-50-keyboard-t14538.html ISO50]
| 50%
| Cherry MX
| atmega32U4-mu (AVR)
| only
| DFU
| [https://github.com/trebb/iso50 kicad]
| micro (internal)
| 7
| plate<ref name="platestabs" />
| manual bootloader installation required
|-
| [http://deskthority.net/workshop-f7/the-long-journey-of-the-whitefox-t12134.html WhiteFox]
| 65%
| Cherry MX
| MK20DX256VLH7 (ARM)
| supported
| [https://github.com/kiibohd/controller/wiki/Bootloader kiibohd]<ref name="kiibohdDFU" />
| N/A
| micro
| Caps; Backlight
| PCB<ref name="PCBstabs" />
|
|-
| [http://winkeyless.kr/product/b-face-x2-pcb/ Bface] / [https://geekhack.org/index.php?topic=50580.msg1179292#msg1179292 faceW/faceU]
| 60%
| Cherry MX
| atmega32A (AVR)
| supported
| modified [https://www.obdev.at/products/vusb/bootloadhid.html bootloadHID]<ref name="bootloadHID">bootloadHID: Possible to use the command line bootloadHID utility from [[https://www.obdev.at/products/vusb/bootloadhid.html these sources] for flashing. Windows binaries also [https://geekhack.org/index.php?topic=50580.msg1256970#msg1256970 in SPRiT's firmware files].</ref>
| N/A
| mini
| Caps; Backlight; possible RGB
| PCB<ref name="PCBstabs" />
| Bface X2 supports RGB side/bottom bling 
|-
| [http://www.gonskeyboardworks.com/pcbs-and-controllers/113-nerd-60-ver20-pcb.html GON's NerD60]
| 60%
| Cherry MX
| atmega32U4 (AVR)
| supported
| GON's own<ref name="GONbootloader">GON's bootloader: must use [http://www.gonskeyboardworks.com/manuals/110-nerdy-gui.html his GUI] for flashing</ref> / DFU <ref name="Converting NerD60 to TMK"> DFU can be used, a detailed guide for flashing is here [https://deskthority.net/wiki/Converting_NerD60_to_TMK Converting NerD60 to TMK]</ref>
| N/A
| mini
| Caps; Backlight; side/bottom
| PCB<ref name="PCBstabs" />
| No RGB support yet for NerD60
|-
| [http://deskthority.net/group-buys-f50/hypermicro-t9565.html HyperMicro]
| 40%
| Cherry MX
| Teensy 2.0 (atmega32U4)
| N/A [http://deskthority.net/viewtopic.php?f=50&t=9565&p=202994#p202994 supported layouts]
| HalfKay<ref name="HalfKay">PJRC's HalfKay Teensy bootloader: Flash with [https://www.pjrc.com/teensy/loader.html TeensyLoader]</ref>
| N/A
| mini/as wired
| backlight?
| PCB<ref name="PCBstabs" />
| ONLY EXISTS AS PROTOTYPE. 7BEAT!
|-
| [http://deskthority.net/workshop-f7/qhack-development-t8543.html qHack]
| 60%
| Cherry MX
| Teensy 2.0 (atmega32U4)
| N/A
| HalfKay<ref name="HalfKay" />
| N/A
| mini/as wired
| backlight?
| PCB<ref name="PCBstabs" />
| ONLY EXISTS AS A FIGMENT OF IMAGINATION trackpoint possible
|-
|}

<references />

[[Category:Keyboard modding]]