Table of PCBs
From Deskthority Wiki
Jump to navigationJump to search
| PCB | Size | Switch | Chip | ISO? | Bootloader | Design files | Connector | LEDs | Stabs | Comments |
|---|---|---|---|---|---|---|---|---|---|---|
| GH60 | 60% | Cherry MX | atmega32U4 (AVR) | supported | DFU<ref name="ATMELDFU">ATMEL DFU: Flash with dfu-programmer or FLIP.</ref> | N/A | mini | Caps | PCB<ref name="PCBstabs">PCB mount stabilizers supported. Note that plate mount stabilizers' support depends only on the plate used.</ref> | Backlight: individual LEDs with extra module (N/A) |
| hasu's Alps64 | 60% | Alps | atmega32U2 (AVR) | supported | DFU<ref name="ATMELDFU" /> | kicad | mini | none | plate<ref name="platestabs">Only plate mount stabilizers supported; i.e. this PCB can not be used without a plate.</ref> | |
| Infinity | 60% | Cherry MX or Alps | MK20DX128VLF5 (ARM) | not supported | kiibohd<ref name="kiibohdDFU">Kiibohd DFU: Flash with dfu-util.</ref> | kicad | mini | none | plate<ref name="platestabs" /> | |
| ISO50 | 50% | Cherry MX | atmega32U4-mu (AVR) | only | DFU | kicad | micro (internal) | 7 | plate<ref name="platestabs" /> | manual bootloader installation required |
| WhiteFox | 65% | Cherry MX | MK20DX256VLH7 (ARM) | supported | kiibohd<ref name="kiibohdDFU" /> | N/A | micro | Caps; Backlight | PCB<ref name="PCBstabs" /> | |
| Bface / faceW/faceU | 60% | Cherry MX | atmega32A (AVR) | supported | modified bootloadHID<ref name="bootloadHID">bootloadHID: Possible to use the command line bootloadHID utility from [these sources for flashing. Windows binaries also in SPRiT's firmware files.</ref> | N/A | mini | Caps; Backlight; possible RGB | PCB<ref name="PCBstabs" /> | Bface X2 supports RGB side/bottom bling |
| GON's NerD60 | 60% | Cherry MX | atmega32U4 (AVR) | supported | GON's own<ref name="GONbootloader">GON's bootloader: must use his GUI for flashing</ref> / DFU <ref name="Converting NerD60 to TMK"> DFU can be used, a detailed guide for flashing is here Converting NerD60 to TMK</ref> | N/A | mini | Caps; Backlight; side/bottom | PCB<ref name="PCBstabs" /> | No RGB support yet for NerD60 |
| HyperMicro | 40% | Cherry MX | Teensy 2.0 (atmega32U4) | N/A supported layouts | HalfKay<ref name="HalfKay">PJRC's HalfKay Teensy bootloader: Flash with TeensyLoader</ref> | N/A | mini/as wired | backlight? | PCB<ref name="PCBstabs" /> | ONLY EXISTS AS PROTOTYPE. 7BEAT! |
| qHack | 60% | Cherry MX | Teensy 2.0 (atmega32U4) | N/A | HalfKay<ref name="HalfKay" /> | N/A | mini/as wired | backlight? | PCB<ref name="PCBstabs" /> | ONLY EXISTS AS A FIGMENT OF IMAGINATION trackpoint possible |
<references />
