Editing Membrane keyboard (section)

==Actuation==
===Pressure actuation===
Pressure-actuated membrane keyboards use two or three membranes. Electric current is conducted between exposed pads in the top membrane when it is pressed down against the bottom membrane. The bottom membrane does not move, and in rare cases a [[PCB]] is used instead of the third membrane. The top and bottom layers are held apart by a spacer membrane with one hole per key; pressing a key pushes a small portion of the top membrane down through one of these holes and brings it in contact with the bottom membrane.

[[File:Pressure membrane assembly.svg|centre]]

Very little pressure is required to press the membrane sheets together, and it is unlikely that anyone would feel the plastic flex downwards by around 0.09 mm; with the rubber domes removed, the membrane layers simply resemble a "futuristic"-looking solid-state capacitive panel. A rough test using five pence coins (officially 3.25 g each) demonstrated actuation with between four and six coins, suggesting 13 to 19.5 g actuation force; the same keyboard (a Chicony-made Viglen KU-0325) tested with coin stacking as having between 65 and 75 g actuation force, giving a very approximate indication of the relationship between dome force and membrane force.

<gallery widths=250 heights=187>
File:Membrane force test -- coins.jpg                       | Coin test of a typical membrane assembly (Viglen KU-0325, Chicony OEM)
File:Membrane force test -- pressure concentrator.jpg       | Pressure concentrator to simulate a rubber dome or spring
File:Membrane force test -- balanced coins.jpg              | Coins balanced on the concentrator
</gallery>

There are multiple methods for applying pressure to the top membrane, as explained below.

====Rubber dome over membrane====
Rubber dome over membrane is the most common type of keyboard design manufactured today, for both desktop and notebook computers. Notebook keyboards typically use [[scissor switch]]es, which are a compact derivative of rubber dome over membrane.

A [[rubber dome]] is placed above each pair of contact pads; this functions as the [[return spring]] as well as providing a soft surface to transfer force onto the membranes. Rubber dome over membrane keyboards typically have very little [[overtravel]]; it is necessary to [[bottom out]] on every keystroke.

The terms "membrane" and "rubber dome" are [[Membrane vs rubber dome|frequently conflated]], owing to how typical keyboards utilise both. However, membrane keyboards do not require rubber domes, and rubber domes do not require membranes: each can be used with suitable alternatives.

[[File:Rubber dome over membrane, exploded.svg|centre|650px]]

The rubber domes can be left loose (as found in Alps and Silitek keyboards), glued to the top membrane (as found in NMB keyboards), or most commonly, moulded from a single sheet.

<gallery widths=250 heights=187>
File:AppleDesign Keyboard (Alps version) membrane module discrete domes.jpg | Discrete domes in an Alps-made [[AppleDesign Keyboard]]
File:AppleDesign Keyboard (NMB,B) -- membrane assembly 2.jpg                | Membrane assembly of NMB-made [[AppleDesign Keyboard]]
File:AppleDesign Keyboard (NMB,B) -- membrane assembly 4.jpg                | NMB domes, glued to top membrane
File:Fujitsu FKB4700 -- dome sheets.jpg                                     | [[Fujitsu FKB4700]] dome sheets
File:Viglen KU-0325 -- membrane and domes.jpg                               | Viglen KU-0325 membrane and dome sheets
</gallery>

====Spring over membrane====
In some older keyboards, a spring is placed inside the [[slider]]. As the key is depressed, this spring makes contact with the top membrane. After sufficient pressure is applied, this spring deforms the top membrane enough to make the switch. As the spring can be compressed further, overtravel is possible.

Spring-over-membrane switches typically use a second device to provide additional force; this will normally be a second helical spring, but [[buckling rubber sleeve]]s have also been used, such as in the [[Fujitsu Libertouch]]. [[Omron vase spring]] does use a single metal spring.

<gallery widths=250 heights=187>
File:Oriental Tech OK-100M -- membrane pressure springs.jpg | Membrane pressure springs in an [[Oriental Tech OK-100M]]
</gallery>

See: [[:Category:Spring-over-membrane switches|Spring-over-membrane switches]]

====Prong over membrane====
Prong over membrane, or single spring over membrane (depending on your definition of "spring"), is a cheaper alternative to spring over membrane. The role of [[motion reducer]] is changed from being a helical spring to a flat plastic prong. These prongs are not discrete; they are part of the same moulding as the plate that holds the sliders or retains the integrated mount keycaps. In these keyboards, the return spring sits over the prong; as the key is depressed, the prong moves downwards proportionally at a lower rate than the switch until it is pressing the membranes closed.

See: [[:Category:Prong-over-membrane switches|Prong-over-membrane switches]]

====Hammer over membrane====
Spring-over-membrane switches provide a smooth increase in force against the membrane. Hammer-over-membrane designs strike the membrane instead. The term is something of a misnomer, as it is typically used to refer to [[IBM buckling spring]] switches, which use a small flat paddle to provide the impact. The [[Acer switch]] however concentrates the force into a small circular area on the end of a pivoting bar, which holds the bottom end of the return spring. The exact specifics of the operation have not been studied.

See: [[:Category:Hammer-over-membrane switches|Hammer-over-membrane switches]]

<!--
Is this really a membrane keyboard, or just a switch mechanism that is built on a membrane?

===Conductive actuation===
Conductive actuation involves a single membrane sheet with pairs of exposed pads. A conductive object is brought down by each key to bridge these pads. This can be a rubber dome or, in the case of Mitsumi keyboards, a rubber foot.

<gallery widths=250 heights=187>
File:Apple Keyboard II Mitsumi opened.jpg                | Mitsumi-made [[Apple Keyboard II]] keyboard opened up
File:Apple Keyboard II Mitsumi layers.jpg                | The base, rigid metal membrane backplate, and single membrane layer
File:Apple Keyboard II Mitsumi key system rear.jpg       | Rear of the switch assembly, showing the conductive feet on the sliders
</gallery>
-->