Editing SMK inverse cross mount (section)

===White (tactile)===
From a [[Tulip ATK 03.01.44]] keyboard:

<gallery widths=250 heights=187>
File:SMK inverse cross mount -- white tactile switches.jpg   | White tactile switches
File:SMK inverse cross mount -- white tactile.jpg            | White tactile switches on mounting plate
File:SMK inverse cross mount -- white tactile, close-up.jpg  | Close-up
File:SMK inverse cross mount -- white tactile, rear.jpg      | Rear view
File:SMK inverse cross mount keycap.jpg                      | Keycap
File:SMK inverse cross mount -- isolated, inverted.jpg       | Single, de-soldered switch
File:SMK inverse cross mount -- isolated, rear.jpg           | Rear view
File:SMK inverse cross mount -- base.jpg                     | Base
File:SMK second generation -- retention clip release 1.jpg   | Insert thin implement and prise clip open
File:SMK second generation -- retention clip release 2.jpg   | Upper shell fully clear
File:SMK inverse cross mount -- opened.jpg                   | Switch opened up
File:SMK inverse cross mount -- static contact in situ.jpg   | Static contact wire in its recess
File:SMK inverse cross mount -- static contact removed.jpg   | Static contact wire removed
File:SMK inverse cross mount -- tactile leaf removed.jpg     | Tactile leaf removed
File:SMK Alps mount -- lower shell.jpg                       | Lower shell, with differing front and back heights (photo is from [[SMK Alps mount]] variant, but the design is the same)
File:SMK inverse cross mount -- fully disassembled.jpg       | Fully disassembled
File:SMK inverse cross mount -- opened, alternative view.jpg | Partially reassembled with both contacts in place
</gallery>