Alps spring over membrane
From Deskthority Wiki
 | |
| Manufacturer | Alps Electric |
|---|---|
| Sense method | Membrane |
| Keycap mount | Alps mount |
| Switch mount | Plate mount |
This article is a stub. You can help Deskthority by expanding it.
Alps spring over membrane is a provisional name for an Alps membrane switch using discrete plate-mounted switches with Alps mount sliders. Each switch module contains two helical springs: a return spring for the slider, and a downward-facing contact spring that applies pressure to the membrane. The latter is likely to permit mid-travel actuation.
The switch is probably linear or progressive rate, and non-clicky.
It appears that Alps moulded spring over membrane was the reduced cost successor.
Gallery[edit | edit source]
-
Top view onto the switch -
Bottom of the switch
Keyboards[edit | edit source]
- Some C.ITOH keyboards<ref name="MouseFan_CITOH" />
References[edit | edit source]
<references> <ref name="MouseFan_CITOH">MouseFan — C.ITOH 2種 Retrieved 2015-07-22.</ref> </references>
