Editing RollerMouse (section)

==How to open==
[[File:rollermousefree2_103.jpg|320px|thumb|right|9 screws in 3 differend lengths.]]
Put the RollerMouse upside-down into its box. If you don't have the original box, just make sure it's on a soft surface, such that nothing gets scratched and the RollerMouse does not roll away (hence its name!).

Undo all screws you can see. There are 2 screws a bit shorter and one longer than the others. The long one (makred red) goes into the center hole and the 2 short ones (marked green) into the holes left and right to it (see picture).


There are 2 additional screws hidden under one of the rubber pads:
[[File:rollermousefree2_204.jpg|320px|thumb|right|hidden screws under one of the rubber pads.]]

Now, you can gently pop open the clips at the top side (i.e. where the rollerbar is).

The 2 hidden screws need not to be mounted in again, as they are totally useless and make it more difficult to open the RollerMouse the next time.
{{-}}