Editing
Logitech G500
(section)
From Deskthority Wiki
Jump to navigation
Jump to search
Warning:
You are not logged in. Your IP address will be publicly visible if you make any edits. If you
log in
or
create an account
, your edits will be attributed to your username, along with other benefits.
Anti-spam check. Do
not
fill this in!
== Disassembly == First, i would like to say, that disassembly of this mouse is really a pain in the ass. Okey, let's get to it.. # Unscrew five cross-point screws, that are under the mouse feets. # Carefully take the mouse apart. Watch out to not damage the electrical tape, you need to detach it from the top cover. # Take off the red, translucent weight-slot. # Detach the bold that's on the black part, on the back of the mouse wheel, behind the translucent part. Take off the mouse wheel. # Unscrew two screws that are on the front of the PCB (there are little springs under them, make sure you don't damage them), and two screws that are near the black part, in which the bolt was. # Unscrew two smaller screws that are on the bottom level PCB, one is above laser sensor, and one is at the far back of the bottom level PCB. # You can now take off the PCB, they are soldered together, so you need to take both at once. There is a small translucent part on the front, you just need to take it off with the PCB. # You can now detach the cable. You also can desolder the microswitches, though the PCB are soldered together, so this may be tricky, they are about 8mm apart from each other. Compromise would be, to just take apart the microswitches, without desoldering them. And replace only the springy-metal piece and top cover of microswitch. I've done it myself, and can say that it works as intended. No more double-click issue. Assembly in the revered order, my advise for You, is that some steps for assembly are easier done with the mouse turned on it's back, for example, screwing the little screws, or putting back the small translucent part that was between PCBs. The cable uses total of 5 wires. Specs of the original FFC/FPC Flat Flex Cable: * AWM VW-1 20624 60V * 65mm of length * 10-pin * 0.5mm pitch * Type A ( isotropy ) - pins on the same sides <gallery> File:Logitech G500 Connector.jpg|The cable connector File:Logitech G500 Disassembled PCB.jpg|Diassembled PCB </gallery> [[Category:Logitech mice]] [[Category:List of all pointing devices]]
Summary:
Please note that all contributions to Deskthority Wiki may be edited, altered, or removed by other contributors. If you do not want your writing to be edited mercilessly, then do not submit it here.
You are also promising us that you wrote this yourself, or copied it from a public domain or similar free resource (see
Project:Copyrights
for details).
Do not submit copyrighted work without permission!
Cancel
Editing help
(opens in new window)
Navigation menu
Page actions
Page
Discussion
Read
Edit
Edit source
History
Page actions
Page
Discussion
More
Tools
Personal tools
Not logged in
Talk
Contributions
Create account
Log in
Navigation
Main page
Deskthority forum
Support Deskthority
Search
Main categories
Guides
Keyboards
Keyboard switches
Keycaps
Keyboard modding
Pointing devices
Brands & companies
Group buys
Other topics
Wiki info & links
Recent changes
Random page
All pages
Deskthority wiki help
MediaWiki help
Tools
What links here
Related changes
Special pages
Page information