Editing Aegray wireless (section)

= Notes =
Overall it works pretty well.  There are a few glitches from time to time with the wireless (a stuck key), especially if I'm further from the receiver, but not bad in general.  Some things I would do differently if I were to start again:

* Probably use an xbee pro or xbee wired antenna for greater range and hopefully eliminate any lost packets even at bigger distances
* I could probably make this with lower cost, less parts, and less space using a chip that had wireless integrated, especially since the xbee is relatively large.  I was looking at a wixel ( http://www.pololu.com/catalog/product/1336 ) however when I started out I knew a lot less about electronics and wasn't really comfortable doing that much outside of the directions I had already seen on the geekhack post.  There are probably other chips like this that would work better.
  


Also, reading through the code and notes from the following two projects was extremely helpful in understanding how the datahands worked:

https://github.com/JesusFreke/teensyhand

http://geekhack.org/index.php?topic=12212.0

[[Category:Keyboard modding]]