Editing RAFI RS 76 M (diode) (section)

==Reassembly==
While disassembly is trivial, reassembly is fiddly, as all that holds the switch mechanism together is the top cover and the very weak friction fit of the movable contact. Failure to keep the slider depressed with your thumb during reassembly can result in the switch flying apart.

#Insert diode; it will be loose fit until the lid is replaced
#Insert return spring
#Place the slider over the return spring and press it down with your thumb (otherwise it will simply fall out)
#Keeping the slider depressed, slide the movable contact over the slider, and lower it into place (this may require tweezers, as it is quite tricky to position it into its slot)
#Gently ease off the pressure on the slider; the movable contact may remain in place, but it may have lost its friction fit during removal and if so it would fly out if the slider were released, along with the slider and return spring
#If the movable contact is in firmly, you can let go of the slider and snap the cover back on; if the movable contact appears that it will come loose, then keep the slider depressed with your thumb while you slide the cover into place, and then snap the cover back on