Editing Graphics for insert molding

This article is about how to prepare graphics for production of double-shot, or insert molded keys, as specified by [[Signature Plastics]]. Other manufacturers might have different, but similar requirements.

In order to be scalable, graphics must be in SVG format.
It is not sufficient to have a PNG or JPG graphic embedded in a SVG.

If you want to check an SVG file for being a true SVG, just take a look at its source code:

Is it all text? Good.

Else: You've got some work to do!

==Requirements==

The insert-molding process requires certain minimum measures for the graphics to make sure the plastic can float properly.

- Lines must be at least 0.2mm thick.

- Gaps between lines must be 0.5mm thick.

- Islands, no matter if they are the insert part or the key itself, must be at minimum 0.5mm in diameter.

==Dimensions==

The dimensions of a graphic on a key are limited. On a regular 1 [[unit|units]] key from the [[Signature Plastics DCS family]], the graphic can only be 9.04mm wide and 10.84mm tall.

[[File:TuxKey9with4eyes_009b.png]]
[[File:icon_wildduck.png]]

==Examples==

[[File:Awesomeyellow_001.png]]


==Collection==
<gallery widths=75px heights=75px>
File:Round4_alien.png
File:Round4_backspace.png
File:Round4_circle.png
File:Round4_coffee.png
File:Round4_diamond.png
File:Round4_down_arrow.png
File:Round4_escarrow.png
File:Round4_handbag.png
File:Round4_insert_small.png
File:Round4_marrow_down.png
File:Round4_marrow_up.png
File:Round4_parrow_down.png
File:Round4_parrow_left.png
File:Round4_parrow_right.png
File:Round4_parrow_up.png
File:Round4_printer.png
File:Round4_printer_alt.png
File:Round4_retarrow.png
File:Round4_shift_arrow.png
File:Round4_square.png
File:Round4_tabarrow.png
File:Round4_tarrow.png
File:Round4_triangle.png
File:Round4_unlock.png
</gallery>

[[Category:Guides]]