Editing Futaba MA series (section)

==Details==
MA series switches are branded "Futaba" on the bottom. Confirmation of identity requires de-soldering the switch from the keyboard. The switch shell is held closed by melted pins; the switch would require glue to reassemble it once the pins have been destroyed. The switch has three legs, in an asymmetric arrangement relative to the branding, with two legs on the left (top-left and bottom-left) and one on the centre right. The top-left and right legs are connected together.<ref name="KBT-EAT-1010" />

The same keycap mount and slider design was later used for the [[Sejin Futaba-mount dome]] switch, which used [[rubber dome]]s over membrane.

The clicky versions use a [[stacked spring]] arrangement.