Editing Hi-Tek Series 725 first generation (section)

===Upper case===
The upper case is a single piece of thick, molded plastic with a beige, textured coating. The base plastic is white with a slightly yellow tint. The case has 8 threaded bosses. The bosses at the top and bottom of the case are use to attach the rear cover. The 4 shorter bosses on the sides of the case are used to attach the switch assembly. Early models had threaded brass inserts while later models had the screws threaded directly into the plastic. The top edge of the case features a series of half round protrusions that may be for strengthening. A single cable port is located about a quarter of the way in from the right hand side of the case. The feet are black plastic. A pigtail like spring holds each foot in place and supports two positions.