Editing Keyboard terminology

{{TODO revise|draft level=first draft}}

This page provides an overview to the most common keyboard terms.

==Keys and keycaps==
A computer keyboard is an arrangement of buttons called '''keys'''. The visible part of a key is called a '''[[keycap]]''' or '''keytop'''. Keycaps are normally marked with '''[[legend]]s''': writing that indicates what the key does, such as "Q" or "[[Caps Lock]]".

<gallery widths=250 heights=187>
File:Acer 6312-TW -- dye-sublimated keycaps.jpg | Keys
File:Thick engraved keycaps.jpg                 | Keycaps
</gallery>

Various methods exist to put the legends on keycaps. '''[[Double-shot moulding]]''' involves moulding the text out of plastic and then moulding the key around that first moulding, while '''[[pad printing]]''' uses thick, opaque ink to print the text onto the keycaps via a silicone pad. See [[keycap printing]] for a description of these and other methods such as dye-sublimation printing and laser marking.

<gallery widths=250 heights=187>
File:Signature Plastics novelty doubleshot.jpg  | Double-shot keycaps
File:KBC Poker II -- backlit keycap.jpg         | Backlit keycaps
</gallery>

Keycaps are removable; they are either a friction fit, or clip in place. Below each keycap is a '''keyswitch''', or '''switch''' for short. A keyswitch is an electric or electronic device that detects that a key has been pressed.

<gallery widths=250 heights=187>
File:Removing a key with a keypuller.jpg        | Removing a keycap with a [[keycap puller]]
File:Cherry MX blue closeup.jpg                 | Keycap removed from a discrete switch keyboard
File:Dell KB522 -- dome and keycaps.jpg         | Keycap removed from a rubber dome keyboard
</gallery>

==Switches==
Broadly speaking, switches can be discrete (separate units) or they may be one indivisible assembly.

The term "switch" is somewhat misleading. In most cases, discrete switches really do switch electric current on and off, but they can also use forms of electromagnetic sensing. See [[keystroke sensing]] for more detailed information on the various types of switch, including metal contact, capacitive, and Hall effect.

===Discrete switches===
Keyboards are all different, but the most common arrangement of discrete switches is [[plate mount]]: the switches snap into slots in a mounting plate, before being soldered to a PCB.

[[File:Keyswitch illustration.svg|centre]]

Typically, switches are self-contained units with solder terminals on the bottom. A plunger called a '''[[slider]]''' provides the vertical motion (supported by a '''[[return spring]]'''), and the keycap fits onto the slider. The term "stem" or "keystem" can refer either to the protrusion that holds the slider or, with [[Cherry MX]] switches in particular, the entire slider. Ridges in the upper shell stop the switch falling through the slot in the mounting plate, and retention clips at the sides of the switch press against the plate from below.

[[File:Switch parts, external.svg|centre]]

===Rubber dome over membrane===
The vast majority of consumer keyboards manufactured today now are '''[[rubber dome over membrane]]'''. Silicone rubber domes, normally in the form of a sheet of domes, provide the spring force that pushes the keys back up when released, replacing the metal helical springs in more expensive keyboards. The electrical switching is provided by three sheets of thin plastic, called [[membrane]]s. Thin keyboards, such as those found in laptops, use '''[[scissor switch]]es''', which are simply a variety of rubber dome over membrane where scissor mechanisms support the keycaps in order to reduce the overall height of the keyboard.

[[File:Rubber dome over membrane.svg|centre]]

===Switch configurations===
Normal switches are called '''momentary''', as they typically are only closed (connected) for a moment, and will open (disconnect) when you let go. Normal switches will connect a single circuit pathway, or provide only one of some other form of sensing; such a switch is called '''single pole single throw normally open''' (SPST NO). NO is also called '''form A''', and NC is also called '''form B'''.

'''[[Alternate action]]''' switches (also '''latching action''' or '''push-push''') will stay down when pressed; to release them, they must be pressed a second time. Such switches were used for [[lock key]]s in the 70s and early 80s, after which they went out of fashion, with Apple being the last prominent manufacturer to use them, up to the [[Apple Extended Keyboard II]].

'''[[Double action]]''' or '''two-stage''' switches connect two circuit paths in sequence, with the second connection made after the key is pressed further. These are more likely to be found in electric typewriters.

Redundancy can be provided with a second pair of terminals. Here, a single switch with a single plunger connects two separate circuit paths at once; this is called '''double pole single throw''' (DPST). These are not generally found in keyboards, but [[Micro Switch SD Series]] switches are known for having redundant sense lines. In some cases, switches clearly support four terminals, but are seldom if ever seen with the second pair of holes populated, with the available factory configurations left as a mystery. As time passes, and more specifications are acquired, the nature of switches become clear. Some are found to have four terminals for DPST, and some are found to have four terminals for two-stage action.

Some switches have three terminals to provide '''changeover''' action (current is diverted from one circuit to another), or four terminals where one pair of contacts is normally open and the other is normally closed. The latter will function as the former if the input terminals are connected at the PCB. Changeover is also described as '''form C'''.

The increased affordability of microprocessor-driven equipment has removed the necessity of more complex switch configurations for keyboards, as the software takes care of the machine state, but other (non-computer) equipment may also find a use for switches other than SPST NO.

==Mechanical keyboard==
{{Main|Mechanical keyboard}}

The term "mechanical" is used by some manufacturers to [[metal contact switch]]es: that is, switches where the electric current passes through a sprung piece of metal that is pressed against another piece of metal.

However, one of the best-known "mechanical" keyboards is the [[IBM Enhanced Keyboard]], better known by its series name, of IBM Model M. The Model M series is membrane, which should disqualify it from being classed as mechanical.

Metal contact keyboards are not inherently high quality, and high quality keyboards are not all metal contact, such as the Model M previously mentioned, and the various electromagnetic sensing methods that typically offer greater longevity than physical switch mechanisms.

While the term is unlikely to fade out any time soon, take note that its meaning is not defined.

==Feel==
The term '''[[keyfeel]]''' refers to how a type of keyboard or switch feels to type on. The keys may feel heavy or light, and they may exhibit a lot of friction or be very smooth. Within the subject of feel, there are some specific concepts:

'''[[Force]]''' refers to the force that you feel in your finger when pressing a key. The force changes the further you press the key, and the rate of change may itself change. The subject of force covers how the force changes throughout the keystroke, and therefore what typing feels like.

'''[[Travel]]''' refers to the vertical motion of a key, and the range of this motion. '''Total travel''' is normally between 2.5 and 4 millimetres. '''Pretravel''' refers to how far the key must be pressed before it '''[[actuation|actuates]]''' (when the keyboard detects a keypress) and '''overtravel''' is how much further you can press the key after it has actuated.

==Switch types==
The overall feel of a switch can be classified into several specific types. In addition to feel, some switches emit a distinct sound as they actuate, as a form of feedback to the operator. The three most common types of switch sound and feel are given below; other types are also described under [[force]].

===Tactile switch===
Tactile switches are the most common type of switch. A tactile switch provides a change in force during the keystroke. The typical usage of the term is for a switch that suddenly feels lighter when pressed part way down, often described as a "bump". In higher-end switches, this drop in force tells you that the actuated, but in standard rubber dome over membrane keyboards it is simply a characteristic of how the key feels.

===Linear switch===
A linear switch is a switch that gets progressively stiffer during key travel, and thus has no tactile 'bump'. A force graph of an ideal linear switch will show a straight line rise of force from the start to the end of travel, but in practise the rate of force increase may be change at different points of the travel. Linear switch designs are simple and reliable, and are common in specially-designed rugged keyboards. They were very common in the 1970s and early 1980s for terminal and PC keyboards, but have been eclipsed by the popularity of tactile switches since the mid to late 1980s.

===Clicky switch===
A '''[[clicky]]''' switch is designed to emit a sound when it actuates. While all keys make some sound when they are struck, a clicky switch is one that generates a separate, deliberate sound to notify the operator that the keystroke was registered. A '''clicky keyboard''' is a keyboard with clicky switches; keyboards that do not click but nonetheless have a crisp and distinct or simply loud typing sound (which is frequently the case with old keyboards due to the metal construction inside) are often incorrectly described as "clicky" by people not familiar with intentionally clicky keyboards.

Because click mechanisms use a spring that must be primed and triggered, there is always a drop in force at the point that the click is heard. That is, all clicky switches are also tactile. It is possible for the keyboard itself (not the switches) to generate sound separately (using a buzzer or solenoid) without affecting the feel of switches, but "clicky" keyboards refer to keyboards where the switches themselves produce the sound.

Clicky switches are generally more tactile than switches designed to be tactile without making a noise, but the extra sound on top of what is often an already loud keyboard is not always desirable.

==Further reading==
For a comprehensive list of terms, see [[:Category:Keyboard terms|keyboard terms]].

[[Category:Guides]]