Editing RAFI full-travel key switch (section)

===Miniature parts===
Every RAFI switch family features very small parts:

*The magnet in RAFI RS 76 C is 2 mm wide, 3 mm tall and 1 mm deep
*The latching slide block in RS 74 M is 2.8 mm wide and 3.9 mm tall
*The follower pin in RS 74 M is around 3.2 mm long; the part that rides on the pressure spring is 1 mm diameter and around 1.9 mm long, while the part that runs inside the latch track is a mere 0.5 mm diameter and around 1.4 mm long (getting accurate measurements of such a fiddly part proved too difficult)
*The follower spring in RS 74 M is 2.7 mm long and 0.9 mm diameter
*The stationary contact in the diode version of RS 76 M is 1.7 mm wide, 2.6 mm tall and 0.9 mm high
All such parts are easy to lose during disassembly and inspection!

<gallery widths=250 heights=187>
File:RAFI RS 74 M SPDT latching -- follower pin length.jpg | RS 74 M follower pin
File:RAFI RS 74 M SPDT latching -- follower pin.jpg        | Follower pin detail
File:RAFI RS 74 M SPDT latching -- small spring length.jpg | RS 74 M follower spring
File:RAFI RS 74 M SPDT latching -- small spring.jpg        | Follower spring detail
File:RAFI RS 76 M (diode) -- stationary contact length.jpg | RS 76 M with diode, stationary contact
File:RAFI RS 76 M (diode) -- stationary contact.jpg        | Stationary contact detail
</gallery>