Editing Lubrication (section)

====Waxboil Mod====
The waxboil/wax mod is known to be one the most effective way of lubricating/restoring an Alps switch's smoothness. Although not exactly the same as the original Alps lubricant, it is reported to give a similar push-feel and greatly reduces or eliminates binding. It is generally not recommended to boil bamboo housings as they are more prone to deforming due to a higher ABS content than pine housings.

First, the switches need to be disassembled. The top housings and sliders are put in boiling water to clean them of any dirt or dust that may be present. Boiling the sliders will clean off any original lubricant present, so it is only recommended to boil the switches if the original lubricant is causing issues or has worn off.

First, pour boiling water into a container, then add the wax from a tealight candle, preferably made of Sasol 5203. Then the sliders are added, and shaking/stirring vigorously creates a temporary suspension of wax in the water, which will help coat the sliders in a layer of wax. Take the sliders out by pouring the mixture into a mesh strainer, then allow them to dry and cool down while keeping the sliders separated. The top housings are usually not waxed.

Wiping off the side of the slider will help preserve the tactility of tactile switches and the clickiness of clicky switches.